Cold Water Tank Cleaning and Disinfection. Quote within one working day.
- Quote within 1 working day
- Certificate for your log book
Does your tank need cleaning?
Not every tank does. A clean tank with a good lid, an intact insect screen and cold, moving water may only need its annual inspection. A tank with sludge, scale, debris or warm, still water does need cleaning, and the risk assessment will have said so.
Had a risk assessment that lists the tank as an action? Tell us what it said and we quote within one working day.
Tell us what you needNo assessment yet? Get that first. It tells you whether the tank needs a clean, or whether it should go altogether.
Get my price
What it is and what you get
A cold water storage tank feeds the cold taps, and often the hot water cylinder, in buildings that are not fed straight from the mains. If the water in it warms up or stands still, and the tank collects debris, legionella can grow there and be carried to every outlet it feeds. Keeping the tank clean, cold and moving is the main control for cold water systems.
Cleaning and disinfection means: drain the tank; clean it and remove the sludge; refill with fresh water and a measured dose of disinfectant, usually chlorine; draw that water through to every outlet the tank feeds; hold it for the contact time; then neutralise and flush until no disinfectant is left. Chlorine at 50 parts per million for at least an hour, with 30 ppm still present at the end, is the usual regime; BS 8558 allows lower doses for longer.
Before the work, a safe system of work is written for your site. It covers access, isolation, confined-space rules where the tank is one, the chemicals used, protective equipment and where the waste water goes. Warning notices go on outlets while the disinfectant is in the system, so nobody uses them.
What you get
- The tank drained, cleaned, sludge removed, and any faults noted: lid, insect screen, insulation, corrosion, oversizing.
- The tank and the pipework it feeds disinfected and flushed to every outlet, with the disinfectant levels measured and recorded at the tank and at the far outlets.
- A cleaning and disinfection certificate with the date, the method, the chemical, the concentrations and contact time, and the name of the person who did the work. This is one of the records ACOP L8 lists.
- Before and after photographs of the tank.
- A note of anything that still needs fixing, with a quote within one working day if you want it done.
If you want to confirm the disinfection worked, samples should be taken between two and seven days after the refill. That is quoted separately. Legionella testing and water sampling
When you need it
HSE guidance lists when hot and cold water services should be cleaned, flushed and disinfected, as set out in BS 8558:
- The annual tank inspection finds contamination or stagnation. Sludge, debris, scale, corrosion, or a tank that is oversized for the water it turns over.
- A new installation or refurbishment of the hot and cold water system, and new parts that were pressure-tested with water at the factory.
- The building or system has been out of use and not flushed. That can be as little as two or three weeks in warm weather, depending on the system and who uses it.
- The system has been altered or opened for maintenance in a way that could let contamination in.
- A sample result shows contamination (see the action levels on the testing page).
- During or after an outbreak linked to the system.
- Your risk assessment says so.
Separately, every stored-water tank should be inspected once a year: lid fitted and sound, insect and vermin screens intact, insulation good, water surface clean, and the water cold. If debris or vermin are found, inspect more often. That inspection is part of a monitoring contract. Legionella monitoring and log books
The question to ask first: do you need the tank at all? If the building could run on mains water, removing the tank removes the risk. Your assessor will say so in the report if that is the better answer.
Your legal duties
Under COSHH and ACOP L8, if you are an employer or in control of premises you must assess the risk from legionella, prevent or control it, and keep the system and the water in it clean. The frequency and method of routine cleaning should be identified in your risk assessment and written into your scheme of control.
Keep the certificate. Records of cleaning and disinfection are among the records ACOP L8 says to hold; monitoring and inspection records are kept for at least five years.
Using a contractor does not move the duty. You should satisfy yourself the contractor is competent before you sign; the HSE points to the LCA Code of Conduct as the illustration of the service to expect.
Priced per site
Priced per site, by the number and size of tanks, the outlets fed from them, and access. Quote within one working day.
Who are the LCA?
The Legionella Control Association (LCA) is a UK body for companies that provide legionella control services. It was founded in 1999 by the Water Management Society and the British Association for Chemical Specialities (now the BCA). Member companies are audited when they join and every year after that. The audit is against the LCA Code of Conduct and its Service Standards, and covers only the services they have registered. A company is only listed while it appears on the LCA directory.
Your assessment is carried out by our City & Guilds qualified, LCA registered risk assessors. The registration is shown on your quotation, and you can check it on the LCA directory.
Registration shows a company works to an audited standard. It is not a guarantee, and the LCA does not assess individual staff, so we also show you exactly what is included and what happens on the day. Read more
Questions people ask
How often should a cold water tank be cleaned?
When the annual inspection shows it needs it, not on a fixed calendar. HSE guidance says inspect tanks once a year and clean and disinfect where there is contamination or stagnation, after work on the system, after a long period out of use, or after a positive sample.
Is tank cleaning a legal requirement?
Not by itself. Legally, you must assess the risk and keep the system clean; the assessment decides whether that means cleaning the tank.
How long does tank cleaning take?
Most single tanks take half a day to a day, including the contact time. Water is off, or outlets are out of use, for part of that. We agree the timing with you when we confirm.
Will the water be off?
Yes, for part of the visit. The tank is drained and the outlets it feeds cannot be used while the disinfectant is in the system. We plan the visit round your hours.
Do I get a certificate?
Yes. A cleaning and disinfection certificate with the date, method, chemical, concentrations, contact time and the name of the person who did the work. Keep it with your risk assessment.
Can you just clean the tank without disinfecting the system?
No, not as a rule. Cleaning alone leaves whatever was carried into the pipework. HSE guidance describes cleaning and disinfection together, drawing the disinfectant through to every outlet. We quote the whole job so the certificate means something.
What about the hot water cylinder?
Calorifiers are inspected and, where needed, drained and cleaned separately, usually once a year. Tell us what you have and we quote both.
Sources
- ACOP L8 fourth edition
- HSG274 Part 2 paras 2.57, 2.60, 2.126 to 2.137 and Table 2.1
- BS 8558, Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings (British Standard, paid document, not linked)
- HSE, Preventing or controlling the risk
Priced per site. Quote within one working day.
Need a legionella risk assessment as well? Get my price