Legionella Remedial Works. Quote within one working day.

The fixes your risk assessment listed, done by your technician (the person who does the work), signed off and recorded, so every action on the list is closed before the next review.
How many sites?

Your quote by email within one working day · No obligation

Used only for this enquiry. No marketing lists. Privacy notice

  • Quote within 1 working day
  • Priced from your report
  • Signed off and recorded

Start with the report

Every legionella risk assessment ends with a list of actions. Some are things you do yourself: set the cylinder to 60°C, flush the outlets nobody uses, write the checks into a log book. Some need a plumber who knows why the job is there. That second list is remedial works.

  • Got a report with actions on it? Type the actions in, or paste them from the report, and we quote each one within one working day.

    Tell us what you need
  • No report yet? The assessment comes first. It is the only way to know which works are needed and which are not. Fixed price within one working day.

    Get my price

What it is and what you get

Remedial works are the physical changes that remove or control a risk the assessment found. HSE guidance is built round a short list of controls. Keep hot water hot and cold water cold. Stop water standing still. Keep the system clean. Use materials that do not feed bacteria. Control spray. Most remedial jobs put one of those right.

The jobs that come up most

  • Dead legs and little-used outlets removed. A pipe run to a tap nobody uses holds warm, still water. HSE guidance says consider removing such outlets and cut the redundant pipe back to the main run, ideally at the tee, so no stub is left.
  • Cold water tank faults put right. A close-fitting lid, insect and vermin screens on the overflow and vents, insulation to keep the water cold, corrosion treated, or an oversized tank replaced with a smaller one or removed altogether.
  • Calorifier (hot water cylinder) work. Thermostats set so stored water is 60°C or above, return legs reaching 50°C, a drain valve fitted where there is none so the base can be purged, an inspection hatch, or a cylinder replaced.
  • Pipework insulation and separation. Cold pipes lagged and moved away from hot ones so cold water stays below 20°C.
  • TMVs fitted where the assessment found a scalding risk, or removed where it found none, and strainers fitted so they can be serviced.
  • Showers and spray outlets. Heads and hoses replaced with ones that can be cleaned, redundant showers removed, spray taps swapped for plain outlets.
  • Point-of-use heaters and water softeners replaced, relocated or removed where the assessment says they add risk.

What you get

  • A quote for each action on your report, line by line, so you can do them in order of risk and budget.
  • The works done by your assessor's own engineers, approved plumbing contractors under the WaterSafe / WRAS scheme. They work to Water Regulations and to your risk assessment, not around it.
  • A completion note for each action: what was done, where, when, by whom. It goes with the report so the next assessment can close the action.
  • Where a change means the schematic or the written scheme must change, a note saying what to update.

When you need it

  • Your report has actions marked high or medium priority. The assessment tells you what; the priority tells you when. Do the high ones first.
  • A monitoring visit or your own log book shows a control failing that a setting or a flush cannot fix: a cold outlet that never gets below 20°C, a hot outlet that never reaches 50°C in a minute.
  • A sample result was positive and the cause turned out to be a dead leg, a warm tank or a cool cylinder.
  • The building's use has changed. Fewer people, a wing closed, a shower block unused. Outlets that were fine when busy are now stagnant.
  • You are refurbishing anyway. The cheapest time to remove a tank or a dead leg is while the ceiling is down.

What remedial works are not for: a clean tank inspected every year, a system that meets its temperatures, or a low-risk site with mains water, instant heaters and no showers. If your assessment found no risk, there is nothing to fix, and we will not quote for it.

Your legal duties

COSHH requires you to prevent exposure to legionella where you reasonably can, and otherwise to control it. ACOP L8 says the first choice is to avoid the systems or parts of systems that lead to exposure. Removing a redundant tank, shower or dead leg is that choice in practice.

The record of remedial work, and the date it was completed, is one of the records ACOP L8 says to keep. The assessment itself must be reviewed when the water system changes, so a completed action should be read back into the assessment and the schematic.

If you do nothing, the risk stays and so does your liability. The HSE can prosecute if a risk has not been assessed or controlled, and failing to follow ACOP L8 has to be answered for in court.

Priced per action

Priced per action, from your report. Quote within one working day.

Questions

Questions people ask

What are legionella remedial works?

The physical fixes a risk assessment calls for: dead legs removed, tank lids and screens fitted, cylinders set or replaced, pipes insulated, TMVs fitted or removed, showers replaced. Each one puts a HSE control back in place.

Do I have to do everything on the report?

Do the high-priority actions first and the rest in order. Some actions are settings or flushing you can do yourself. The assessment is the record that you considered every action; a written reason for not doing one is better than silence.

Can any plumber do it?

Any competent plumber can cut a pipe. The difference is knowing why the job is there, cutting back to the tee rather than leaving a stub, and recording it so the assessment can close the action. The HSE expects you to check the competence of anyone you use.

How do you price remedial works?

Line by line from your report, within one working day. Send the report with your enquiry, or type the actions in. Anything that needs a look first is said, not guessed.

Will you update my risk assessment?

Not automatically. The completion note tells you what changed. If the change alters the system, the assessment and schematic need a review; we quote that too.

What a legionella risk assessment covers

Is a dead leg really a problem?

Yes. Still water in a pipe at room temperature is where legionella grows, and the first draw carries it to the tap. HSE guidance says remove them or, until then, flush them weekly and log it.

Priced per action. Quote within one working day.

Tell us what you need

Need a legionella risk assessment first? Get my price

Who are the LCA?

The Legionella Control Association (LCA) is a UK body for companies that provide legionella control services. It was founded in 1999 by the Water Management Society and the British Association for Chemical Specialities (now the BCA). Member companies are audited when they join and every year after that. The audit is against the LCA Code of Conduct and its Service Standards, and covers only the services they have registered. A company is only listed while it appears on the LCA directory.

Your assessment is carried out by our City & Guilds qualified, LCA registered risk assessors. The registration is shown on your quotation, and you can check it on the LCA directory.

Registration shows a company works to an audited standard. It is not a guarantee, and the LCA does not assess individual staff, so we also show you exactly what is included and what happens on the day.

Read more