What Happens If Legionella Is Found?
It is manageable, as long as you act on it. The steps in HSE guidance: resample, review your risk assessment and controls, fix the cause, disinfect where needed, and test again. Legionella is usually found where water sits still or warms up. Think of little-used taps and showers, dead legs, tanks and the base of hot water cylinders.
A positive result does not always mean your controls have failed. ACOP L8 notes that legionella is present in almost all natural water. What matters is what you do next, and the records that show it.
No up-to-date risk assessment? Start there. A fixed price within one working day.
What to do when a sample comes back positive
The laboratory report shows which outlets were positive, and how many bacteria were counted. Then work through these steps, in order.
- Read the result with a competent person. ACOP L8 says a suitably experienced and competent person should interpret the results. One positive outlet among many clear ones means something different from positives everywhere.
- Resample. HSE guidance says to resample in most cases, to check the first result.
- Review your risk assessment and your controls. Straight away where most samples are positive or the count is high.
- Fix the cause. Usually a dead leg, a little-used outlet, a tank that warms up, or a cylinder running too cool. ACOP L8 says carry out any remedial measures promptly.
- Disinfect where needed. HSE guidance says to consider disinfecting the system where most samples are positive, or the counts are high.
- Test again. Samples to check a disinfection should be taken two to seven days after the system is refilled. Sooner can give a false clear result. Keep testing until the results show control.
- Record it all. ACOP L8 lists remedial work, cleaning and disinfection, and test results among the records to keep, with dates.
HSE guidance sets action levels in colony-forming units per litre (cfu/l), and these steps start from a result over 100 cfu/l. The full table, and what each result means, is on our legionella testing page.
If someone is ill: RIDDOR and outbreaks
A positive water sample is not a case of Legionnaires' disease. Under RIDDOR, the law on reporting workplace injuries and diseases, legionella reporting is about people who are ill, not water results.
ACOP L8 says a case of legionellosis must be reported to the HSE under RIDDOR when both of these are true:
- a doctor has notified the employer of the diagnosis
- the employee's current job involves work on or near cooling systems at work, or on water systems likely to be contaminated
Cases among residents, guests or the public are handled differently. Legionnaires' disease is notifiable, so doctors report it to the UK Health Security Agency. Where cases are linked, an outbreak control team investigates, and the HSE or the council may visit.
If a case is linked to your building, review the risk assessment at once. ACOP L8 names it as a reason for review, and HSE guidance lists it as a time to clean and disinfect the system. Expect the investigators to ask for your records and to take samples.
Where legionella is usually found
Legionella grows where water stands still, sits between 20°C and 45°C, and has sludge, scale or biofilm to feed on. Positive samples usually come from the same few places:
- Little-used taps and showers. A shower in a spare room or a tap in a store cupboard. Water sits in the pipe at room temperature between uses.
- Dead legs. Pipes left behind when a tap or appliance was taken out, or capped off. No water flows through them at all.
- The base of hot water cylinders and calorifiers. Cold water comes in at the bottom and sediment settles there, so the base can sit well below the temperature at the top.
- Cold water tanks. Especially a tank in a warm loft or plant room, one too big for the building, or one with a loose lid.
- Showers and shower heads. They make the fine spray people breathe in, and scale in the head and hose gives bacteria somewhere to live.
- Water after a mixing valve. Thermostatic mixing valves (TMVs) stop scalding by blending water to a warm temperature, right in the range where legionella grows.
- Spa pools and hot tubs. Warm water and spray, right where people sit. The HSE names them as a main source of legionella.
- Buildings left empty. A school over the summer, or a closed wing. HSE guidance says water left unused and unflushed for as little as two or three weeks may need disinfecting.
The temperatures that keep legionella out of these places are in what temperature kills legionella. Why it grows where it does is in what legionella is.
The fixes that usually follow
Each common cause has a standard fix. Your risk assessment says which apply to your site.
| What was found | The usual fix |
|---|---|
| A dead leg, or a tap nobody uses | Take it out and cut the pipe back to the main run. If it has to stay, flush it weekly and log it. |
| A hot water cylinder running too cool | Put the temperature right, and check the pump that circulates the hot water. |
| A warm or dirty cold water tank | Clean and disinfect it, fit a close-fitting lid and insulation, or replace it with a smaller one. |
| Scale in shower heads and hoses | Clean, descale and disinfect them, or remove showers nobody uses. |
| Legionella through much of the system | Disinfect the whole system with heat or chlorine, then resample two to seven days after it is refilled. |
Disinfecting a system is not a small job. Water hot enough to disinfect can scald, and chlorine is hazardous. HSE guidance asks for a safe system of work, warning signs on the outlets, and competent people to do it.
Sampling, remedial works and tank cleaning and disinfection are each priced per site. Tell us what you need and you get a quote within one working day.
Why an up-to-date risk assessment comes first
A sample tells you what was in the water at one outlet on one day. The risk assessment tells you why, and what to change.
It maps the system, finds the dead legs and little-used outlets, and checks the tanks and cylinders. Without it, you fix the outlet that failed and guess about the rest.
The HSE says what you do after a result depends on your risk assessment. HSE guidance also says a positive result calls for a review of the assessment and the controls.
If yours is out of date, or you have never had one, a new assessment is the first step. What makes one out of date is in when to review a legionella risk assessment.
- Your assessment is carried out by our City & Guilds qualified, LCA registered risk assessors, regularly audited.
- Your assessor checks every tank, cylinder, heater and outlet on the site.
- A written report to BS 8580-1, with photographs where they help and a list of actions in order of priority.
What it costs for your site is on our legionella risk assessment cost guide. Six questions, then a fixed price by email within one working day.
City & Guilds qualified, LCA registered assessors · Report usually within 10 to 15 working days of the visit
Questions people ask
Does a positive legionella sample mean someone will get ill?
Not necessarily. It shows legionella is in the water at that outlet, and that the controls need checking. The HSE says people catch Legionnaires' disease by breathing in small droplets of water containing the bacteria.
Do I have to report a positive legionella result to the HSE?
Not the result on its own. RIDDOR reporting covers cases of legionellosis in employees whose work involves cooling systems or contaminated water systems, once a doctor has notified the employer. Keep the result with your records and act on it.
Where is legionella most likely to be found in a building?
Where water sits still or at the wrong temperature. HSE guidance names dead legs, little-used outlets, the base of hot water cylinders, warm cold water tanks and areas of poor circulation. Showers and spa pools matter too, because they make spray.
Is finding legionella a breach of health and safety law?
Not by itself. ACOP L8 says a positive result may not mean the controls have failed, because legionella is present in almost all natural water. The duty is to assess the risk, control it and act on what the checks show.
Do I need a new risk assessment after legionella is found?
You need a review at least. HSE guidance says it should be immediate where most samples are positive or the counts are high. If the assessment is out of date, or the system has changed, a new one is the place to start.
Sources
- HSE, ACOP L8: The control of legionella bacteria in water systems (fourth edition, 2013), paragraphs 18, 47, 68, 69 and 74
- HSE, HSG274 Part 2: The control of legionella bacteria in hot and cold water systems, paragraphs 2.4, 2.25, 2.70, 2.77, 2.78, 2.120 to 2.133, Table 2.2 and Appendix 3
- HSE, Testing and monitoring your water system for legionella
- HSE, Legionella risk in water systems
- HSE, Duties under other regulations
- HSE, What Legionnaires' disease is and typical symptoms
- UKHSA, Notifiable diseases and how to report them
This guide explains legionella legislation and HSE guidance in plain English. It is not legal advice.
Related
Who are the LCA?
The Legionella Control Association (LCA) is a UK body for companies that provide legionella control services. It was founded in 1999 by the Water Management Society and the British Association for Chemical Specialities (now the BCA). Member companies are audited when they join and every year after that. The audit is against the LCA Code of Conduct and its Service Standards, and covers only the services they have registered. A company is only listed while it appears on the LCA directory.
Your assessment is carried out by our City & Guilds qualified, LCA registered risk assessors. The registration is shown on your quotation, and you can check it on the LCA directory.
Registration shows a company works to an audited standard. It is not a guarantee, and the LCA does not assess individual staff, so we also show you exactly what is included and what happens on the day. Read more
Your fixed price. Six questions from here.
Carried out by our City & Guilds qualified, LCA registered risk assessors.