Legionella Testing and Water Sampling. Quote within one working day.

Samples taken from the right outlets and tested at a UKAS-accredited laboratory (the UK's official accreditation for labs), as HSE guidance asks. Results explained in plain English. Carried out by our City & Guilds qualified, LCA registered risk assessors.
How many sites?

Your quote by email within one working day · No obligation

Used only for this enquiry. No marketing lists. Privacy notice

  • Quote within 1 working day
  • UKAS-accredited laboratory

Looking for a "legionella test"? Check this first

Most people who search for a legionella test need a legionella risk assessment. Legislation asks you to assess the risk. It does not ask you to test the water, except in specific cases.

The HSE says sampling is not usually required for hot and cold water fed from the mains, unless the risk assessment or your monitoring shows a problem. There is no legionella certificate in law. A test result is not a risk assessment, and a clear result does not mean you have met your duty.

So:

  • No risk assessment yet, or it is out of date? Start there. A fixed price within one working day.

    Get my price

Your assessment, your monitoring or a regulator says sample? Read on. When you need sampling

What it is and what you get

Legionella sampling means taking water from chosen outlets in a set way, keeping it cool and getting it to a laboratory that grows and counts any legionella in it. The result is a number: colony-forming units per litre (cfu/l). The number tells you whether the system is under control, and what to do if it is not.

Where the samples come from matters as much as the result. HSE guidance says sample separate hot and cold outlets, not mixer taps, and not downstream of mixing valves or showers. That way the sample shows the water moving round the system, not the last few centimetres of pipe. Each sample is labelled with its location and whether it was taken before or after flushing.

The usual points: the nearest and furthest outlets on each branch or loop (the sentinel outlets); the calorifier (hot water cylinder) outlet, and its base where that is safe; the cold water tank; and any outlet that is too warm, low on disinfectant or little used.

HSE guidance says sampling should follow BS 7592, the code of practice for sampling for legionella, and that analysis should be done in a UKAS-accredited laboratory using the current ISO method. Your assessor takes the samples to BS 7592, and a UKAS-accredited laboratory analyses them.

What you get

  • A sampling plan for your site: which outlets, why, and how many. Agreed with you before the visit.
  • Samples taken by your assessor to BS 7592, with a record of each location, time and temperature.
  • The laboratory's certificate of analysis for every sample.
  • A plain-English results letter: each result against the HSE action levels, what it means for your site, and what to do next, in order.
  • Where a result needs action, a quote for that work within one working day of the results.
  • Records you can file with your risk assessment and keep for five years.

Results take about 10 working days, because the laboratory has to grow the sample before it can count it. We tell you the date when we confirm the visit.

When you need it

HSE guidance names the situations where sampling for legionella is appropriate. Your risk assessment should say which of them apply to your site.

  • Temperatures are not being met. Hot water should reach 50°C at the tap within a minute (55°C in healthcare) and cold should stay below 20°C. If your log book shows misses, the guidance is a thorough review plus frequent testing, weekly at first, until the system is back under control.
  • The system is treated with chemicals instead of heat. Where biocides let you run water cooler, test monthly at first as an early warning, then review the frequency once the regime is proven.
  • Vulnerable people use the water. Care homes and healthcare premises. The risk assessment should say where and how often to sample.
  • A case or outbreak is linked to the site. The incident control team will want samples.
  • After a clean and disinfection. To confirm it worked, sample between two and seven days after the system is refilled. Samples taken straight after can give a false negative.
  • A private water supply, or an incoming mains supply warmer than 20°C.
  • Your assessment says so. Any outlet with low use, stagnation, excess storage, dead legs or heat gain.

If none of these apply, sampling is money spent on a number HSE guidance does not ask for. Keep to the temperature checks and flushing in your written scheme, and review the assessment when something changes. What a risk assessment covers

What the result means

HSE guidance gives action levels for hot and cold water systems. Your results letter puts each result against them.

ResultWhat HSE guidance says to do
Not detected, or up to 100 cfu/lNo action from the result alone. Keep the controls running.
More than 100 and up to 1,000 cfu/lIf only a few samples are positive, resample. If most are positive, the system may be colonised at a low level: review the controls and the risk assessment at once, and consider disinfection.
More than 1,000 cfu/lResample and review the controls and the risk assessment at once, including possible disinfection. Retest a few days after disinfection and keep testing until control is shown.

A clear result is no guarantee that legionella is absent. And a positive result is not by itself a failure of your controls, because legionella is found in almost all natural water. That is why the letter reads the results alongside your temperatures and your written scheme, and why a competent person should interpret them.

If legionella is found. The usual steps are: resample to confirm, find the cause (a dead leg, a cold tank warming up, a calorifier below 60°C), fix it, disinfect where the guidance says to, and resample two to seven days after. We quote each step within one working day. Nothing is done without your say.

Your duties around sampling

Keep every result. HSE guidance says records of any monitoring, inspection, test or check, with the dates, should be kept for at least five years, signed or otherwise authenticated by the person who did the work.

Sampling is one part of a control scheme, not the scheme. The written scheme should set the sampling locations and frequency, and say what happens when a control limit is exceeded and who is told.

If you use a contractor for this, the duty stays with you. The HSE expects you to check the contractor is competent; the LCA Code of Conduct is the example it gives of the level of service to expect.

Legionella testing near me: priced per site

Priced per site, by the number of samples and outlets. Type your site's postcode on the enquiry page and it tells you straight away whether we cover it. Quote within one working day.

Who are the LCA?

The Legionella Control Association (LCA) is a UK body for companies that provide legionella control services. It was founded in 1999 by the Water Management Society and the British Association for Chemical Specialities (now the BCA). Member companies are audited when they join and every year after that. The audit is against the LCA Code of Conduct and its Service Standards, and covers only the services they have registered. A company is only listed while it appears on the LCA directory.

Your assessment is carried out by our City & Guilds qualified, LCA registered risk assessors. The registration is shown on your quotation, and you can check it on the LCA directory.

Registration shows a company works to an audited standard. It is not a guarantee, and the LCA does not assess individual staff, so we also show you exactly what is included and what happens on the day. Read more

Questions

Questions people ask

Is legionella testing a legal requirement?

No. The legal duty is to assess the risk and control it; sampling is only advised in specific cases, such as temperatures not being met or vulnerable users.

Legionella legislation in plain English

How often should legionella testing be done?

Only as often as your risk assessment says, if at all. Where a system is out of control, HSE guidance says weekly at first; where chemicals replace heat, monthly at first. Mains-fed hot and cold water that meets its temperatures does not usually need testing.

How much does legionella testing cost?

It depends on the number of samples and outlets, so we quote each site within one working day. A legionella risk assessment is different: its fixed price follows within one working day.

Get my price

How long do legionella test results take?

About 10 working days. The laboratory grows the sample before it counts it, so no legionella result comes back on the day. We give you the date when we confirm the visit.

Can I use a legionella test kit myself?

Not for anything that has to count as monitoring. HSE guidance says analysis for legionella should be done in a UKAS-accredited laboratory using the ISO method, and interpreted by a competent person. A kit result that is not from such a laboratory will not stand up.

Is testing included in a legionella risk assessment?

No. A risk assessment inspects and measures; it does not send water to a laboratory. Sampling is quoted separately when the assessment calls for it.

What the price includes

What happens if legionella is found?

Resample to confirm, find and fix the cause, disinfect where HSE guidance says to, then resample two to seven days after. Your results letter sets the steps out in order, and we quote each within one working day.

Do you test drinking water for other bacteria?

Yes. Samples can be tested for Pseudomonas and E. coli as well as legionella, quoted the same way, within one working day.

Tell us what you need

Sources

Priced per site. Quote within one working day.

Tell us what you need

Need a legionella risk assessment as well? Get my price

Who are the LCA?

The Legionella Control Association (LCA) is a UK body for companies that provide legionella control services. It was founded in 1999 by the Water Management Society and the British Association for Chemical Specialities (now the BCA). Member companies are audited when they join and every year after that. The audit is against the LCA Code of Conduct and its Service Standards, and covers only the services they have registered. A company is only listed while it appears on the LCA directory.

Your assessment is carried out by our City & Guilds qualified, LCA registered risk assessors. The registration is shown on your quotation, and you can check it on the LCA directory.

Registration shows a company works to an audited standard. It is not a guarantee, and the LCA does not assess individual staff, so we also show you exactly what is included and what happens on the day.

Read more